This switch is used on most Bunn home coffee makers for models made in 1998 and after. It is the on off warmer switch located on the front of the home coffee machines. This switch should fit Bunn Velocity Brew models GR, GRX, BX, GR10, B10 and others. Before purchasing this switch, measure the old switch to make sure the front of the switch is approximately 0. 50 inch x 0. 75 inch. If your warmer does not turn on or if the switch doesn’t light up, this is the first thing to try replacing. In addition to its use on the Bunn home coffee machine, this switch is used on Bunn commercial warmer model WS2 with rear mounted switches.
Product Features
- Bunn Home Coffee Machine Warmer Switch
- This switch should fit Bunn Velocity Brew models GR, GRX, BX, GR10, B10 and others.
- Switch mounts on front of Bunn home coffee makers
- Red lighted switch turns warmer on and off
Works great! Worked perfect, took 2 minutes to change out. Our old switch was worn and shorting. I posted a picture of the coffee pot for reference, it’s the lighted switch in the picture.
15 minute switch swap. Have a older Home model Bunn. Likely 10 or more years old having a {black} front lable/ badge.Easy peasy job to replace its plate warmer on & off lighted switch.5-screws and the water pans hold down Nut. All are in easy reach.However I would suggest for the novice repairers the additional purchase of a silicone {heating tank gasket} also sold by Amazon as a precaution.As that {water tray to tank mount} its silicone gasket flattens due to the heat its subjected to over…
Perfect replacement The switch on my old Bunn coffee maker was wearing out. Instead of replacing the entire coffee maker I found this replacement switch. The fit was perfect, but the terminals were in a different configuration, and there was no wiring diagram. The switch is a perfect replacement and work well. The only reason for the four stars is there was no wiring diagram.